Compound Mitersaws

Compound Mitersaws

23 results - showing 1 - 20  
1 2  
Ordering 
 
With a powerful 15-amp motor, the 3912 features a speed-track sliding fence (5-1/2") system that slides independently for fast bevel cuts. Cut crown molding quickly and precisely using the positive...
 
5.0
 
0.0 (0)
 
The DW715 is powered by a 15-mp motor and comes equipped with a 12" carbide blade which spins at 4,000 rpm. The DW715 incorporates an adjustable stainless steel miter detent...
 
5.0
 
0.0 (0)
 
* Electric Brake stops blade in seconds * 9 positive stops at the most common miter cutting angles * Sliding Fence * Exactline laser alignment system accurately aligns cut line...
 
4.3
 
0.0 (0)
 
Motor 120v AC 15 Amp Motor Speed 4,000 RPM Blade Arbor 1" Blade Diameter 12" Weight 49 lbs. Cutting Capacities:...
 
3.0
 
0.0 (0)
 
This Craftsman 15-amp 12" Compound Mitersaw has a LaserTrac cutting guide for fast and easy setup. Featuring a lightweight, aluminum base, and including great extras like clamps and a...
 
4.0
 
0.0 (0)
 
* Digital LCD (Liquid Crystal Display) for clear and accurate miter and bevel readings * Hitachi's Laser Marker system for increased cutting accuracy * 15 Amp motor with 1,950 Watts...
 
4.3
 
0.0 (0)
 
* Powerful 15 AMP motor delivers 4,000 RPM * 4-1/2" tall pivoting fence for cutting up to 5-1/2" crown molding * Positive miter stops at 9 settings: 15°, 22.5°, 31.6°,...
 
4.3
 
0.0 (0)
 
Miter angle digital readout repeatable to 0.1°. Dual integral lights illuminate the workpiece and cutline from either side of the blade. 15-amp, direct drive motor with soft start maintains...
 
4.8
 
0.0 (0)
 
Amperage: 15.0 Bevel Angle Range: 0° - 47° Bevel Stops: 0° - 47° Miter Angle Range: 0°, 15°, 22.5,° 31.6°, 45° Both left and right Miter Positive Stops: 4,500 ...
 
0.0
 
3.3 (1)
 
Motor: 120V AC, 14 Amps Motor Speed: 5,500 r/min. (RPM) Dust Port: 2-1/2" Blade Arbor: 5/8" Blade Diameter: 10" Cutting Capacities Baseboard against fence: 3-1/2" Crown molding laying...
 
0.0
 
4.8 (1)
 
Blade Diameter 12" Amps 15Amps No Load Speed 3,600rpm Arbor Size 5/8" or 1" Vertical Capacity: Baseboard Against Fence 6-1/2" Vertical Capacity: Crown Molding Vertically...
 
0.0
 
0.0 (0)
 
Blade: Carbide-Tipped Diameter: 10" Motor-Engine: Amps: 15.0 Speed Range: 4800 RPM Bearings: Ball Type: Universal Arbor Size: 5/8 in. Bevel Index: 0 AND 45 DEG. ADJUSTABLE Table Material: Die Cast...
 
0.0
 
0.0 (0)
 
Arbor Size: 5/8 in. Bevel Index: 0 AND 45 DEG. ADJUSTABLE Table Material: Die cast aluminum Angle: Yes Compound Miter: Yes Fence Type: Left and right Miter: Yes Amps: 15.0...
 
0.0
 
0.0 (0)
 
Amperage: 15 Amp, 5000 RPM Arbor Size: 5/8" Bevel Angle Range: 0° - 47° Bevel Stops: 0°, 47° Max. Motor HP: 2.5 HP Miter Angle Range: 0° - 47° Miter...
 
0.0
 
3.5 (1)
 
Motor: 120 V AC, 15 Amp No Load Speed: 4,000 r/min. (RPM) Blade Arbor: 1 in. Blade Diameter: 12 in. Cutting Capacities- Baseboard Against...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Amps 15Amps No Load Speed 5000rpm Arbor Size 5/8" Vertical Capacity: Baseboard Against Fence 3-1/2" Vertical Capacity: Crown Molding Vertically Nested ...
 
0.0
 
0.0 (0)
 
Motor: 120 V, AC only, 15 Amps No Load Speed: 5,500 r/min. (RPM) Blade Arbor: 5/8 in. Blade Diameter: 10 in. Weight: 34 lbs. Cutting...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Arbor 5/8" Max Cutting Capacity (Bevel/Miter) 90°/90° 2-3/4" x 5-1/8" ...
 
0.0
 
0.0 (0)
 
Motor: 120 V AC, 9 Amps Motor Speed: 5,800 r/min. (RPM) Dust Port: 1-1/4 in. Blade Arbor: 5/8 in. Blade Diameter: 7-1/4 in. Cutting Capacities: Baseboard laying flat 3-1/2" |...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Amps 15 No-Load Speed 5,000 Miter Angle Range 0-52 Degrees L & R Bevel Angle Range 0-45 Degree Left Laser Marker Yes Handle Horizontal Weight 26.5 lbs...
 
0.0
 
0.0 (0)
 
23 results - showing 1 - 20  
1 2