Compound Mitersaws

Compound Mitersaws

23 results - showing 1 - 20  
1 2  
Ordering 
 
Motor: 120V AC, 14 Amps Motor Speed: 5,500 r/min. (RPM) Dust Port: 2-1/2" Blade Arbor: 5/8" Blade Diameter: 10" Cutting Capacities Baseboard against fence: 3-1/2" Crown molding laying...
 
0.0
 
4.8 (1)
 
Amperage: 15 Amp, 5000 RPM Arbor Size: 5/8" Bevel Angle Range: 0° - 47° Bevel Stops: 0°, 47° Max. Motor HP: 2.5 HP Miter Angle Range: 0° - 47° Miter...
 
0.0
 
3.5 (1)
 
Amperage: 15.0 Bevel Angle Range: 0° - 47° Bevel Stops: 0° - 47° Miter Angle Range: 0°, 15°, 22.5,° 31.6°, 45° Both left and right Miter Positive Stops: 4,500 ...
 
0.0
 
3.3 (1)
 
Ultimate One-handed Portability-With a compact design, comfortable one-handed rear carry handle and optimized center of gravity Category Best All-around Cut Capacity-6” max crown, 6-3/4" max base against fence, 2” x...
 
0.0
 
0.0 (0)
 
Voltage: 120V ~ 60Hz Power Input: 15 Amps No-Load Speed: 5000/min Stroke Length: 1-1/4" Max Cutting Capacity: 0º miter / 0º bevel: 4x4 board size 0º miter / 45º bevel:...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Amps 15 No-Load Speed 5,000 Miter Angle Range 0-52 Degrees L & R Bevel Angle Range 0-45 Degree Left Laser Marker Yes Handle Horizontal Weight 26.5 lbs...
 
0.0
 
0.0 (0)
 
Blade Diameter: 10" Amps: 15 No-Load Speed: 5,000 RPM Miter Angle Range: 0-52 Degrees L & R Bevel Angle Range: 0-45 Degrees Left Laser Marker: No Handle: Horizontal Weight: 26.3...
 
0.0
 
0.0 (0)
 
Motor: 120 V AC, 15 Amp No Load Speed: 4,000 r/min. (RPM) Blade Arbor: 1 in. Blade Diameter: 12 in. Cutting Capacities- Baseboard Against...
 
0.0
 
0.0 (0)
 
Motor: 120 V, AC only, 15 Amps No Load Speed: 5,500 r/min. (RPM) Blade Arbor: 5/8 in. Blade Diameter: 10 in. Weight: 34 lbs. Cutting...
 
0.0
 
0.0 (0)
 
Motor: 120 V AC, 9 Amps Motor Speed: 5,800 r/min. (RPM) Dust Port: 1-1/4 in. Blade Arbor: 5/8 in. Blade Diameter: 7-1/4 in. Cutting Capacities: Baseboard laying flat 3-1/2" |...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Arbor 5/8" Max Cutting Capacity (Bevel/Miter) 90°/90° 2-3/4" x 5-1/8" ...
 
0.0
 
0.0 (0)
 
Blade Diameter 12" Amps 15Amps No Load Speed 3,600rpm Arbor Size 5/8" or 1" Vertical Capacity: Baseboard Against Fence 6-1/2" Vertical Capacity: Crown Molding Vertically...
 
0.0
 
0.0 (0)
 
Blade Diameter 10" Amps 15Amps No Load Speed 5000rpm Arbor Size 5/8" Vertical Capacity: Baseboard Against Fence 3-1/2" Vertical Capacity: Crown Molding Vertically Nested ...
 
0.0
 
0.0 (0)
 
Blade: Carbide-Tipped Diameter: 10" Motor-Engine: Amps: 15.0 Speed Range: 4800 RPM Bearings: Ball Type: Universal Arbor Size: 5/8 in. Bevel Index: 0 AND 45 DEG. ADJUSTABLE Table Material: Die Cast...
 
0.0
 
0.0 (0)
 
Arbor Size: 5/8 in. Bevel Index: 0 AND 45 DEG. ADJUSTABLE Table Material: Die cast aluminum Angle: Yes Compound Miter: Yes Fence Type: Left and right Miter: Yes Amps: 15.0...
 
0.0
 
0.0 (0)
 
Miter angle digital readout repeatable to 0.1°. Dual integral lights illuminate the workpiece and cutline from either side of the blade. 15-amp, direct drive motor with soft start maintains...
 
4.8
 
0.0 (0)
 
* Electric Brake stops blade in seconds * 9 positive stops at the most common miter cutting angles * Sliding Fence * Exactline laser alignment system accurately aligns cut line...
 
4.3
 
0.0 (0)
 
Motor 120v AC 15 Amp Motor Speed 4,000 RPM Blade Arbor 1" Blade Diameter 12" Weight 49 lbs. Cutting Capacities:...
 
3.0
 
0.0 (0)
 
* Powerful 15 AMP motor delivers 4,000 RPM * 4-1/2" tall pivoting fence for cutting up to 5-1/2" crown molding * Positive miter stops at 9 settings: 15°, 22.5°, 31.6°,...
 
4.3
 
0.0 (0)
 
* Digital LCD (Liquid Crystal Display) for clear and accurate miter and bevel readings * Hitachi's Laser Marker system for increased cutting accuracy * 15 Amp motor with 1,950 Watts...
 
4.3
 
0.0 (0)
 
23 results - showing 1 - 20  
1 2