Power Tools Saws Tablesaw Accessories Miter Gauges & Sleds Woodhaven Super Sled miter sled
 

Woodhaven Super Sled miter sled Woodhaven Super Sled miter sled

Woodhaven Super Sled miter sled

Product Info

Brand
Woodhaven
Model
4965
Approximate Price
$270.00
The Super Sled does it all! The sliding platform measures 23-3/4" square x 3/4" thick. It provides a zero-clearance edge for easy part alignment and clean cuts. Designed to be used on a table saw with at least a 27" deep table. 2-3/8" thickness capacity on most 10" saws. Platform supports parts for crosscuts up 19-1/4" wide (fully supported on platform) or 17-1/4" wide with platform toggle clamps attached. 28" taper length capacity.

Includes a 23-3/4" adjustable steel miter bar that eliminates any side play. Bar rides in your saws 3/8" x 3/4" miter slot. Slot must be between 4" to 7-1/2" from the blade, measured from the blade side of the slot. Can be used in the left or right miter slot. Bar attaches to the platform for either crosscut or taper operation and switches in minutes.
32" Ultra Track fence mounts horizontally for tapers or vertically for crosscuts. Fence can be pivoted clockwise or counterclockwise on the platform for unlimited crosscut and taper settings. All fence adjustments made with knobs.
Indexing holes in platform and stainless steel indexing pins set the fence at the most common angles of 0, 15, 22.5, 30, 36 & 45º. Like our Deluxe Miter gauge, this pin setting method takes the guess work out setting angles and insures the best accuracy. Angles are engraved in the platform for easy reference. Other angles can be set using our optional Mite-R-Gage, or a digital protractor you supply.

Includes a 4519 3" Straight Flip Stop for use with crosscut work on the vertical fence.
Includes an edge stop for use with taper work on the horizontal fence.
Includes two 500 lb. toggle clamps and hardware. Clamps hold stock up to 1-3/4" thick and mount on the horizontal fence for holding tapers, or to the platform for holding crosscuts.
Optional 6305R 1" Riser Kit increases toggle clamp capacity to 2-3/4" thick stock, one required for each clamp.
Optional 789S Flip Stop is used with the fence in the horizontal position.

This unique sled combines crosscut and taper features into one sled, without sacrificing accuracy. That, combined with features like two 500 lb. toggle clamps, an adjustable steel miter bar and more, make this the most versatile heavy duty sled on the market.

The sliding platform measures 23-3/4" square and provides a zero-clearance edge for easy part alignment and clean cuts. Designed to be used on a table saw with at least a 27" deep table. Includes a 23-3/4" adjustable steel miter bar that eliminates any side play. Can be used in the left or right miter slot. Bar attaches to the platform for either crosscut or taper operation and switches between operations in minutes.

32" Ultra Track fence mounts horizontally for tapers or vertically for crosscuts. Fence can be pivoted clockwise or counterclockwise on the platform for unlimited crosscut and taper settings. All fence adjustments made with knobs. Indexing holes in platform and stainless steel indexing pins set the fence at the most common angles of 0, 15, 22.5, 30, 36 & 45º. Angles are engraved in the platform for easy reference.

Includes a 4519 3" Straight Flip Stop for use with crosscut work on the vertical fence. Includes an edge stop for use with taper work on the horizontal fence. Includes two 500 lb. toggle clamps that hold stock up to 1-3/4" thick and mount on the horizontal fence for holding tapers, or to the platform for holding crosscuts.
Lifetime guarantee against defects in material or workmanship. Made in the USA!

Editor review

Woodhaven Super Sled miter sled 2013-06-11 16:28:19 WOOD Magazine
Overall rating 
 
4.0
Performance 
 
4.0
Features 
 
5.0
Ease of Use 
 
4.0
Value 
 
3.0
WOOD Magazine Reviewed by WOOD Magazine    June 11, 2013
Last updated: June 11, 2013
Top 500 Reviewer  -   View all my reviews

Versatile sled does more than 90° cuts

High points: The Super Sled has multiple rows of predrilled mounting holes for the miter bar so you can ensure zero-clearance support for almost any tablesaw after trimming it to size. You can cut up to 32"-long workpieces using the fence’s flip-stop. We liked Woodhaven’s two hefty toggle clamps best among the sleds. The eight-slotted fence can be positioned on edge or its face (letting you use toggle clamps to secure the front and rear of a workpiece), and pivots far enough to make tapered ripcuts.

Low points: Because this sled cannot be calibrated, your tablesaw’s miter slot must be precisely aligned with the blade. And there’s no scale on the fence, so you must use a ruler to set the flip-stop’s distance from the blade.

More points: With 12 miter-detent settings, you drop pins in corresponding holes, slide the fence against them, and then tighten it in place. But to cut miter angles other than the detent settings, you must use a protractor or precut gauge block to set the fence.

Was this review helpful to you? 
20
Report this review
 

User reviews

There are no user reviews for this listing.

To write a review please register or log in.
 
Powered by JReviews