Dust Collection Accessories

Dust Collection Accessories

25 results - showing 1 - 20  
1 2  
Ordering 
 
iVac Switch Box
The iVAC Switch Box is intended for use in on-site applications, where typically only 115Vac services are available. It removes the distraction of turning a dust collection system on and...
 
5.0
 
5.0 (4)
 
Rockler 4'' Spring Hose Clamp
Keep your dust collection system working at maximum suction with this 4" Spring Hose Clamp! Made of durable yellow chromate, the clamp has a 1.75" long bolt that allows you...
 
0.0
 
5.0 (2)
 
Penn State Dust Collector Remote Control
The Long Ranger wireless control can turn your dust collector on or off from as far as 75' even through wood and concrete floors, walls and ceilings. Available for 110V...
 
5.0
 
5.0 (2)
 
Big Gulp Dust Hood
This dust hood makes a good adapter for Contractor-style tablesaws.
 
0.0
 
5.0 (1)
 
Rockler Threaded Disconnect Fitting
Threads provide a secure fit for dust collection expandable hose — no need for metal hose clamps. Opposite end is flared so you can quickly connect or disconnect any woodworking...
 
0.0
 
5.0 (1)
 
Rockler Dust Collection Hose
Clear Flexible Dust Collection Hose is 4" in diameter and and 10' in length. Wire reinforced. One foot length available for short leads on power tools with hard to reach...
 
0.0
 
5.0 (1)
 
Rockler Hose Hanger Clamps
These steel hanger clamps make the installation of 4" diameter dust collection hose quick and easy. Use them to route and secure dust hoses to walls, ceiling, under benches and...
 
0.0
 
5.0 (1)
 
Blast Gate Co. Self-Cleaners
Self-cleaning gates are the same construction as our full blast gates except the galvanized steel slide moves through the open end to push out debris from wood pulp and sticky...
 
0.0
 
5.0 (1)
 
Penn State Quickonnex
This system allows an instant sealed connection to your machine port without clamps. Simply attach the male component to your hose end and the female component to your machine. ...
 
0.0
 
5.0 (1)
 
iVac Proswitch
This is a radio controled switch for the dust collector. The collector get a reciever unit and the tool get a transmitter unit. Once installed which means plugging...
 
0.0
 
4.8 (2)
 
iVac Pro Remote
Developed especially for iVac's Pro Switch System, the Pro Remote works with an iVAC Pro Switch module to turn your dust collector on or off, whether used with or without...
 
0.0
 
4.8 (1)
 
WoodRiver 2.5" Stay Put Hose
Bend it, turn it, twist, pull it, the Stay Put™ hose is perfect for anywhere in your shop. The Stay Put™ hose can be compressed and extended all while holding...
 
0.0
 
4.5 (1)
 
Rockler 4.5'' Keyed Hose Clamps
Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system...
 
0.0
 
4.5 (1)
 
Peachtree Plastic Blast Gates
Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency. Plastic blast gates are economically priced, have a textured surface...
 
0.0
 
4.1 (2)
 
Rockler Dust-Right Master System
This system of dust control accessories has everything you need to revolutionize the way you clean up shop. The secret is the innovative Dust Right® Handle. One end accepts standard...
 
0.0
 
4.1 (2)
 
Rockler Dust-Right Hose
This brilliant hose extends up to 7x its original length for far-reaching cleanup, then compresses back down for easy storage! It slinks with ease around shop stands, power tools, and...
 
0.0
 
4.0 (2)
 
Shop Fox Dust-Collector Remote Control
* Controls 110 volt dust collector from up to 75' away * 220 volt version also available * Includes 2 remotes * New and improved design
 
4.5
 
3.6 (2)
 
Peachtree Drill Press Dust Collector
This is one of the handiest accessories ever for the drill press. If you use your drill press to drum sand this is an absolute must. Adjust the hose to...
 
0.0
 
3.3 (1)
 
Penn State Overarm Blade Guard
Connected to a dust collection system, the Table Saw Dust Collection Guard captures the dust thrown up by your table saw blade. Use it on any table saw with an...
 
4.0
 
3.0 (1)
 
GrnGate Automated Dust Collection System
If you are like many small woodworking shops, you have some sort of dust collection for the various machines. This may range from a roll-around collector you move from machine...
 
4.5
 
0.0 (0)
 
25 results - showing 1 - 20  
1 2